Micro Computer Concepts is a manufacturer of radio repeaters, repeater controllers and repeater related accessories. MCC started making repeater controllers in 1988 and has supplied the Amateur Radio community with a variety of products.
Micro Computer Concepts current line of controllers consist of the following products:
- RC100 is a complete repeater controller with CW ID, timeout timer, COR, tail timer, remote base interface, 15 DTMF-controlled auxiliary outputs, and a complete audio interface with DTMF muting – all programmable with DTMF.
- RC1000 is a complete repeater controller with on board interfacing for the repeater receiver to transmitter, remote base and autopatch. Unlike some controls the RC-1000 contains buffered audio switching and interface allowing for direct connect of the repeater hardware to the control. Pots are provided for adjusting the various audio paths between receiver, transmitter, phone line and remote base. (Note: Pricing for the RC1000 controller is at the bottom of the page.)
- RC-1000V is a complete repeater controller providing all that is needed to connect a receiver and transmitter together to produce a high quality repeater, plus voice identification. With the addition of a phone line, your repeater will have an autopatch.
- Repeaters Micro Computer Concepts has manufactured and marketed repeater controllers for over 12 years. Now it is integrating its controllers with one of the best receiver transmitters to form a ready to plug in repeater on your frequency, tuned and guaranteed. We want to make the repeater installation simple for the repeater owner; a plug and play system. You will need to add duplexer, antenna and 13.8 VDC power supply.
